making the enterprise from a 3.5" diskette

vector drawing of a 3.5 inch diskette labeled 'top secret' next to an arrow that points to a completed diskette starship Enterprise This is an oldie but a goodie. Nerds have been turning 3.5" diskettes into the USS Enterprise for years - it must not have taken long after the medium's introduction for the first person to put things together (literally).

Please note that I respect you too much, dear reader, to refer to these diskettes as floppy disks - the old 5.25" and 8" disks were the only true floppies, as the thin, flexible plastic used in their construction rendered them truly floppy disks.

Anyway, if you've been despairing at what to do with all those diskettes with bad sectors that are no longer able to boot Windows 3.1, here's an afternoon's worth of fun that'll surely dry your tears.


First off, you'll need a diskette that has a metal gate - this won't work with plastic parts. Start by ditching the housing. All we need is the metal gate and the metal hub at the centre of the magnetic disc.

vector drawing of a 3.5 inch diskette labeled 'crime' next to a drawing of the exposed disc and metal gate, the outer plastic housing discarded


Remove and discard the magnetic platter and flip over the hub.

vector drawing of the magnetic disc being removed from the central metal hub of a 3.5 inch diskette, next to two drawings of the bottom and top of the isolated hub


Snip through the thin metal loops at the indicated spot, to create two thin free-floating fingers. Stick these two fingers through the rimward hole of the hub and slide the hub down the thicker part - this may take some force and bending of metal, depending on the precise design of the diskette.

vector drawing of the metal gate of a 3.5 inch diskette with a cutting line, going down the inner thinnest parts of the gate, next to a drawing of the same gate after the cut, next to the diskette hub being attached to the two cut parts

Do slide the hub down a bit - it looks funny if it's up too high. Wrap the protruding fingers over the edge of the hub to secure it.


Next, fold over the two big flaps to form the warp nacelles - fold them out and then fold a smaller part back up, so first zig, then zag.

vector drawing of a cut metal gate of a 3.5 inch diskette with a diskette hub attached, showing how to fold out the two big free-floating flaps outward and then upward, resulting in something that looks like the Starship Enterprise

And that's it - you're ready to leave space dock. You can use tin snips or good scissors to trim down the nacelle arms to improve the likeness if you're into that sort of thing, but this is the basic process that has been handed down from nerd to nerd through the generations - and now you, dear reader, are the next generation. I believe you're ready to boldly go... well, you get the idea.

vector drawing of a completed diskette Enterprise in orbit around a mottled yellow-and-green planet, with the title 'hollow pursuits' printed in blue at the top left