sharepoint online
18570 TopicsFailed to load current time zone
SharePoint List Fails to Save Items After Changing Site Time Zone to "Pacific Time (British Columbia)" British Columbia will move to permanent Daylight Saving Time effective November 1, 2026. As a result, clocks will no longer fall back by one hour and will remain on UTC-07:00 year-round. Microsoft has introduced the new time zone (UTC-07:00) Pacific Time (British Columbia) for this change. As part of this transition, we updated the site's Regional Settings from (UTC-08:00) Pacific Time (Canada/US) to (UTC-07:00) Pacific Time (British Columbia). We have SharePoint lists with Start Date & Time and End Date & Time columns configured as Date and Time fields in multiple sites. Following this change, one specific site is now experiencing an issue where both users and site administrators are unable to save list items. The following error is displayed: "Failed to load current time zone" Additional Details: The issue started immediately after changing the site's Regional Settings. Reverting the site back to Pacific Time (Canada/US) did not resolve the issue. Some other SharePoint sites were updated to the same Pacific Time (British Columbia) setting and continue to work correctly. The affected site contains a calendar view built on a custom SharePoint list. The Start Date and End Date columns are configured as Date/Time fields. Location: Victoria, British Columbia. Has anyone encountered this issue before? Are there any known dependencies related to Regional Settings, Date/Time columns, calendar views, or site time zone configuration that could cause this behavior on a single site while others continue to function normally? Any guidance would be appreciated.Solved553Views1like7CommentsChanging color in Classic SP Calendar
I have a list with a power automate attached to it that will load up the calendar with different department. Right now, everything that is loaded onto the calendar ends up being dark blue. Tried to see if i can change the color in an item and didn't find the option. Is there a way to change the color in a classic calendar?48Views0likes2CommentsModern SharePoint content type list form reverting to Classic view
Hi all, I have problem I am hoping one of you may be able to advise me on. Two of my Modern SharePoint forms based off content types in Lists have reverted to Classic view when used outside the list and I am unable to get them back to the modern view. I would really appreciate if any could advise me on the possible cause and solution! please and thank you37Views0likes4CommentsDisplaying Mermaid diagrams in Sharepoint Online Markdown web parts
Hello, I have been trying to find a way to incorporate/visualize Mermaid diagrams in Sharepoint Online Markdown web parts. Currently, when I try to add Mermaid diagram code to the md content, the diagram does not display, only the underlying code displays. I understand that it is possible to convert Mermaid diagrams to images and then add them to the Sharepoint page, but this breaks apart what would otherwise be intact md file content that can be transferred and displayed elsewhere if needed or pulled from a repository. Any help or pointers to make this work would be greatly appreciated.11KViews15likes8CommentsSharePoint File Attachment Access with OWA
When using Outlook Web Access, we're unable to see our SharePoint Team site when we try to attach a file from the SharePoint site. The SharePoint site is a Team site (classic experience). Is there a way to enable SharePoint as an available location when using the standard paperclip attachment option with OWA? Thanks for any input or suggestions.90Views0likes2CommentsSharePoint Designer 2013
Hello SharePoint Experts, I need some guidance regarding SharePoint Online classic page customization. Our organization is currently using SharePoint Online, and traditionally we have relied on SharePoint Designer 2013 for tasks such as: Editing Classic Pages Modifying Display Forms (DispForm.aspx) Modifying Edit Forms (EditForm.aspx) Customizing List Forms Making page-level changes using ASPX pages However, I am unable to install SharePoint Designer 2013 on my system and would like to understand the available alternatives. Could you please help clarify the following: What is the recommended alternative to SharePoint Designer 2013 for SharePoint Online? How can Classic Pages be edited in SharePoint Online without SharePoint Designer? Is it possible to customize DisplayForm.aspx, EditForm.aspx, and NewForm.aspx without using SharePoint Designer? Can Power Apps be used as a replacement for customized list forms? Are there any supported Microsoft-recommended approaches for customizing classic pages and forms in SharePoint Online? If SharePoint Designer is no longer recommended, what tools are commonly used by SharePoint Online administrators and developers for these scenarios? My objective is to continue maintaining existing classic SharePoint Online sites while following Microsoft's supported and modern approach. Any guidance, best practices, documentation references, or real-world experiences would be greatly appreciated. Thank you in advance for your support.117Views0likes2CommentsSharePoint ZIP service not working on document libraries with custom URLs.
!Hey guys! We have found an issue with the new SharePoint views for document libraries and the download function. Single files are working fine. But when you try to use the "download" button on a folder, the downloaded zips are giving us errors. We detected that it affects all document libraries that are or were created with a custom URL. Ex: The library is in SiteCollection/Lists/DOCUMENTLIBRARY instead of SiteCollection/DOCUMENTLIBRARY. This is affecting all of our old created libraries from years ago, and we can't create any new ones with a custom URL since it affects this functionality. I suspect it has something to do with the API SharePoint uses to zip the content (https://northeurope1-mediap.svc.ms/transform/zip), and that it isn't able to zip files from a library with a custom URL. There isn't much information about this issue (that I could find at least). ¿Does someone know more about this? ¡Thank you!1.8KViews0likes1CommentNew SharePoint Site Creation Controls: A Better Approach to Site Governance
Managing SharePoint site creation is one of those topics that quickly becomes important as a Microsoft 365 environment grows. The challenge is familiar: organizations want to enable self-service, but they also want sites to follow internal governance, naming, ownership, lifecycle, and provisioning requirements. Microsoft is improving this experience by giving SharePoint administrators more control over what happens when users try to create a new site. One particularly useful option is the ability to redirect users to an organization-approved site request process. Instead of relying only on the standard SharePoint site creation experience, administrators can direct users toward their own provisioning solution or request page. This enables scenarios such as: ✅ Request and approval workflows ✅ Custom site provisioning processes ✅ Naming and governance policies ✅ Additional metadata collection ✅ Business justification or ownership checks ✅ Automated provisioning with Power Automate or other solutions Where is the setting? Administrators can find the configuration in: SharePoint Admin Center → Settings → Site creation From there, organizations can decide how the SharePoint site creation experience should work and whether users should be redirected to an approved request process. One important consideration SharePoint site creation is only part of the overall Microsoft 365 provisioning story. Organizations should also consider how Microsoft 365 Groups and Microsoft Teams are created because these workloads can also result in connected SharePoint sites. So, if your goal is comprehensive governance, your strategy should look beyond only the SharePoint Create site experience. 🎥 I created a step-by-step video showing the configuration and how the new experience works: I'm curious how other organizations are approaching this. Do you allow completely open SharePoint site creation, use a request/approval process, or have an automated provisioning solution? Share your approach in the comments. It would be great to compare how different organizations are tackling this. #SharePoint #Microsoft365 #SharePointOnline #Governance #Microsoft365Administration70Views0likes0CommentsNew Word view-only experience shows outdated SharePoint Quick Part values
Hi everyone, We are seeing outdated Quick Part values with the new view-only experience in Word for the web when opening Word documents from SharePoint Online. One particularly critical example is the document version number. I would really appreciate help from other Microsoft 365 customers to determine how widespread this issue is. This is particularly important for us because we use SharePoint as part of a Document Management System, where SharePoint metadata is displayed inside Word documents using Quick Parts / Document Properties in the footer. One of these properties is the document version number, so displaying the correct value is critical. Our upcoming audit will certainly not be happy if we cannot reliably display the correct document version. In the current Document Management System solution the files are not converted from Word to PDF which would have been "solving" this issue. Instead the documents are presented in READ-ONLY when published. What we are seeing For example, we have a Word document where the current version in the SharePoint document library is: Version 3.0 To get the version number to go from version 2.0 to 3.0 an approver has approved the content to make sure that the information is correct and can be published. We then open the document from SharePoint using Open → Open in browser (or using the search and click on the file name). When the document opens using the new Word view-only experience, the Quick Part inside the document displays: Version 2.0 The Quick Part appears to show the value from the previous major version. The overall file content seem to be updated correct except for the Quick Part information. To open the same file in the older Reading View mode, we select View and then click on Reading View and the document displays: Version 3.0 If the file is opened directly in the Desktop version, the correct information is displayed in the Quick part. Microsoft Support has reproduced the issue I have been working with Microsoft Support on this issue for some time and have had several troubleshooting sessions with them. Microsoft Support has now finally been able to reproduce the same behavior. The challenge is that, at the moment, we appear to be one of very few organizations that have formally reported the issue. I would therefore like to find out whether this can be reproduced in other Microsoft 365 tenants as well. This is the main reason I'm reaching out to the community. Can you reproduce this? I would really appreciate it if other organizations using SharePoint Online + Word Quick Parts / Document Properties could test this in their own environment. If you can reproduce the issue, I would also encourage you to report it to Microsoft Support from your own Microsoft 365 tenant. Having independent reports from multiple organizations would help demonstrate that this is not isolated to a particular tenant or document configuration and would provide Microsoft with a clearer picture of the scope and impact. Thanks in advance to anyone who is able to test this. I'm very interested to hear whether other organizations can reproduce the same behavior. Does anyone know if it is possible to "Switch back" to the old view-only experience for all users in the tenant by updating the policy or something else?87Views1like0CommentsWorkflow for importing Excel to List
I'm a novice developing a workflow for importing an Excel spreadsheet to a SharePoint list. Have I missed anything? Workflow: Thoroughly clean up the data in Excel before importing to a list. Caution: Excel filters (and list filters) are case-insensitive and ignore superfluous spaces, etc. So we can't rely solely on filter functionality to find messy values. Instead, consider using the EXACT function in Excel like this: =OR(EXACT(A2,"PRIMARY"),EXACT(A2,"SECONDARY")). See this Stack Exchange post for more options: https://sharepoint.stackexchange.com/questions/317576/find-list-values-that-arent-in-the-picklist-choices Or, as a last resort, we could consider importing to an Oracle table and use a GROUP BY query (SQL) to find incorrect values, since that's dead easy in databases. I don't use Access for this because it has the same filtering limitations that Excel and lists have. Manually create an empty list. Or import a blank list from Excel and modify it. Caution: When importing from Excel to a list, the list won't honor the Excel column names for the internal list names, even if the Excel names are clean. The list will generate column names like "field_0" through to "field_30" (or whatever applies). Google suggests importing from Access is an alternative -- the column names should be honored. https://i.sstatic.net/3KoAsrMl.png Caution: The time zone for my SharePoint sites and personal MS list environment is wrong. It's set to Pacific Time, when it should be Eastern Time. Keep an eye on any list date values to ensure they are correct and haven't been automatically changed to a different day. Import the Excel rows/data using Power Automate. For what it's worth, any dates that get imported via PA will be correct, despite the time zone, unlike when importing data from Excel using the list UI. Inspect the imported data, correct the list columns/settings, correct the Excel data, and repeat #3. Do this multiple times -- as many times as it takes.476Views0likes2Comments